Top

Telescopic spiral Spring covers

Our Telescopic Spring Covers are leading products for almost twenty years if you are looking for protection of your ball screws, columns, spindles and shafts you can consider using our Telescopic spring covers. They reduce the accident risk and increase the precision of your machines and their life. Spiral springs can be used in connection with all cutting and non-cutting machines. Telescopic Spring Covers are made of high quality hardened steel band with special hard wearing features due to our specialized method of finishing.

Telescopic Spring Covers
Telescopic Spring Covers

Standard types and dimensions Abbreviations:

dmax - Maximal Inner Diameter of covered part

Di - Inner diameter of spring
Da - Outer diameter of spring
Lmax horizontal - Maximal extension for horizontal application
Lmax vertical - Maximal extension for vertical application
Lmin - Minimal compression (=steel band width)
na - not available, ask for a customized solution


Telescopic Spring Covers - Technical Specifications

They are spirally wound and produced in the diameters and lengths shown in the tables. Varying band widths ensure a perfect functioning for the various stroke paths,Telescopic spring covers achieve extremely good seal between the single coils in any position. The coils are attached as shown by means of simple centering flanges which allow the coil turning movement. The flanges are not included in delivery. If requested, please give us detailed information about the intended mounting situation. In the case of vertical installation it is recommended that the greatest diameter is at the upper end, and when used horizontally in the direction shavings occur. No maintenance is required. Cleaning is recommended depending on the amount of soiling due to the application of a light film of oil.


For technical reasons, when ordering or inquiring it should be stated whether the flat Telescopic Spring Covers are to be installed vertically or horizontally. Please note the different extension lengths for vertical or horizontal types. We guarantee through our long-term experience of more than twenty years, our exclusive and specially developed machines and highest material requirements, you will receive reliable, affordable and perfectly performing spiral springs.
We offer a wide range of sizes and different materials. Most telescopic spring covers can be also delivered in stainless steel quality (non-rusting), perfect for applications with water and humidity influence. All our spiral springs are customized. Some types are available from stock. We have decided not to have an extensive stock in order to give you better prices. We can still offer you excellent delivery times. After receiving your order, it will be leaving our factory within two weeks

 

SPIRAL SPRINGS |
customized + high quality + competitive prices + short delivery + complete product range


Reach Us
New No 79-Old No 105, Eswaran Koil St, Town Hall, Coimbatore - 641001
Ph : 0422 2395831
Telescopic Spring Covers

The types highlighted yellow are also available in stainless steel.

PART NO

Ø d

Ø D1

Ø D2

L max

L max

L

 

±1

±2

horiz.

vert.

min.

 

 

 

 

 

015/0070/020

11

15

22

---

70

20

015/0100/020

11

15

22

60

100

20

015/0120/020

11

15

22

90

120

20

015/0150/020

11

15

28

110

150

20

015/0200/020

11

15

31

160

200

20

015/0300/020

11

15

32

260

300

20

 

 

 

 

 

 

 

020/0100/020

16

20

30

60

100

20

020/0150/020

16

20

33

110

150

20

020/0200/020

16

20

36

160

200

20

020/0250/020

16

20

39

210

250

20

020/0300/020

16

20

41

260

300

20

 

 

 

 

 

 

 

020/0250/030

16

20

36

210

250

30

020/0300/030

16

20

39

260

300

30

020/0350/030

16

20

41

310

350

30

020/0400/030

16

20

43

360

400

30

 

 

 

 

 

 

 

020/0400/040

16

20

35

360

400

40

020/0450/040

16

20

41

410

450

40

020/0500/040

16

20

48

460

500

40

 

 

 

 

 

 

 

025/0100/020

21

25

36

60

100

20

025/0150/020

21

25

38

110

150

20

025/0200/020

21

25

40

160

200

20

025/0250/020

21

25

44

210

250

20

025/0300/020

21

25

46

260

300

20

 

 

 

 

 

 

 

025/0300/030

21

25

42

240

300

30

025/0350/030

21

25

45

290

350

30

025/0400/030

21

25

48

340

400

30

025/0450/030

21

25

49

390

450

30

025/0450/040

21

25

48

370

450

40

025/0500/040

21

25

49

420

500

40

 

 

 

 

 

 

 

025/0450/050

21

25

41

390

450

50

025/0500/050

21

25

42

450

500

50

025/0550/050

21

25

43

490

550

50

025/0600/050

21

25

44

540

600

50

025/0650/050

21

25

45

590

650

50

025/0750/050

21

25

47

690

750

50

025/0900/050

21

25

57

840

900

50

 

 

 

 

 

 

 

030/0150/030

26

30

39

90

150

30

030/0200/030

26

30

42

140

200

30

030/0250/030

26

30

44

190

250

30

030/0300/030

26

30

46

240

300

30

030/0350/030

26

30

49

290

350

30

030/0400/030

26

30

50

340

400

30

030/0450/030

26

30

53

390

450

30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PART NO

Ø d

Ø D1

Ø D2

L max

L max

L

 

±1

±2

horiz.

vert.

min.

 

 

 

 

 

 

 

 

 

 

 

 

030/0450/040

26

30

53

370

450

40

030/0500/040

26

30

55

440

500

40

030/0550/040

26

30

58

490

550

40

030/0600/040

26

30

58

540

600

40

030/0650/040

26

30

60

590

650

40

030/0700/040

26

30

64

640

700

40

 

 

 

 

 

 

 

030/0150/050

26

30

40

90

150

50

030/0250/050

26

30

43

190

250

50

030/0350/050

26

30

45

290

350

50

030/0450/050

26

30

46

390

450

50

030/0550/050

26

30

48

490

550

50

030/0650/050

26

30

55

590

650

50

030/0750/050

26

30

58

690

750

50

 

 

 

 

 

 

 

030/0650/060

26

30

58

590

650

60

030/0750/060

26

30

55

690

750

60

030/0900/060

26

30

58

840

900

60

030/1000/060

26

30

60

940

1000

60

030/1300/060

26

30

62

1240

1300

60

030/1000/075

26

30

57

900

1000

75

 

 

 

 

 

 

 

035/0100/020

31

35

45

60

100

20

035/0100/030

31

35

44

60

100

30

035/0150/030

31

35

48

90

150

30

035/0200/030

31

35

50

140

200

30

035/0250/030

31

35

52

190

250

30

035/0300/030

31

35

55

240

300

30

035/0350/030

31

35

61

290

350

30

035/0400/030

31

35

63

340

400

30

 

 

 

 

 

 

 

035/0300/040

31

35

48

240

300

40

035/0350/040

31

35

50

290

350

40

035/0400/040

31

35

54

340

400

40

035/0450/040

31

35

58

390

450

40

035/0500/040

31

35

60

440

500

40

035/0550/040

31

35

62

490

550

40

 

 

 

 

 

 

 

035/0350/050

31

35

51

290

350

50

035/0400/050

31

35

52

340

400

50

035/0450/050

31

35

54

390

450

50

035/0500/050

31

35

55

440

500

50

035/0550/050

31

35

57

---

550

50

035/0650/050

31

35

60

590

650

50

035/0750/050

31

35

64

690

750

50

035/0850/050

31

34

65

690

750

50

 

 

 

 

 

 

 

035/0450/060

31

35

53

390

450

60

035/0550/060

31

35

46

490

550

60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The types highlighted yellow are also available in stainless steel.

PART NO

Ø d

Ø D1

Ø D2

L max

L max

L

 

±1

±2

horiz.

vert.

min.

 

 

 

 

 

 

 

 

 

 

 

 

035/0650/060

31

35

59

590

650

60

035/0750/060

31

35

60

690

750

60

035/0850/060

31

35

60

790

850

60

 

 

 

 

 

 

 

035/0550/075

31

35

54

490

550

75

035/0650/075

31

35

55

590

650

75

035/0750/075

31

35

57

690

750

75

035/0850/075

31

35

59

790

850

75

035/1500/100

31

35

74

1440

1500

100

 

 

 

 

 

 

 

040/0150/030

36

40

51

90

150

30

040/0250/030

36

40

56

190

250

30

040/0350/030

36

40

60

290

350

30

040/0400/030

36

40

64

340

400

30

040/0450/030

36

40

64

390

450

30

040/0500/030

36

40

68

500

500

30

040/0350/040

36

40

61

290

350

40

040/0400/040

36

40

63

340

400

40

040/0450/040

36

40

64

390

450

40

040/0500/040

36

40

65

440

500

40

040/0550/040

36

40

68

490

550

40

 

 

 

 

 

 

 

040/0350/050

36

40

56

250

350

50

040/0450/050

36

40

59

350

450

50

040/0550/050

36

40

61

450

550

50

040/0650/050

36

40

65

550

650

50

040/0750/050

36

40

69

650

750

50

040/0850/050

36

40

71

750

850

50

 

 

 

 

 

 

 

040/0350/060

36

40

55

230

350

60

040/0450/060

36

40

58

450

450

60

040/0550/060

36

40

59

430

550

60

040/0650/060

36

40

62

530

650

60

040/0750/060

36

40

66

630

750

60

040/0800/060

36

40

67

800

800

60

040/0900/060

36

40

70

780

900

60

 

 

 

 

 

 

 

040/0650/075

36

40

63

500

650

75

040/0750/075

36

40

66

600

750

75

040/0900/075

36

40

71

750

900

75

040/1100/075

36

40

78

950

1100

75

040/1300/075

36

40

84

1150

1300

75

040/1500/075

36

40

90

---

1500

75

 

 

 

 

 

 

 

040/1000/100

36

40

68

800

1000

100

040/1200/100

36

40

71

1000

1200

100

040/1300/100

36

40

75

1100

1300

100

040/1400/100

36

40

76

1200

1400

100

040/1500/100

36

40

78

1300

1500

100

 

 

 

 

 

 

 

PART NO

Ø d

Ø D1

Ø D2

L max

L max

L

 

±1

±2

horiz.

vert.

min.

 

 

 

 

 

040/1600/100

36

40

78

1400

1600

100

040/1800/100

36

40

82

1600

1800

100

 

 

 

 

 

 

 

040/1800/120

36

40

82

1560

1800

120

040/2000/120

36

40

86

1760

2000

120

040/2200/120

36

40

90

---

2200

120

 

 

 

 

 

 

 

045/0150/030

41

45

56

90

150

30

045/0250/030

41

45

61

190

250

30

045/0350/030

41

45

65

290

350

30

045/0400/030

41

45

66

340

400

30

 

 

 

 

 

 

 

045/0350/040

41

45

65

290

350

40

045/0400/040

41

45

68

340

400

40

045/0450/040

41

45

69

390

450

40

 

 

 

 

 

 

 

045/0450/050

41

45

66

350

450

50

045/0550/050

41

45

68

450

550

50

045/0650/050

41

45

75

550

650

50

 

 

 

 

 

 

 

045/0350/060

41

45

63

230

350

60

045/0450/060

41

45

65

330

450

60

045/0550/060

41

45

65

430

550

60

045/0650/060

41

45

69

530

650

60

045/0700/060

41

45

70

630

700

60

 

 

 

 

 

 

 

045/0650/075

41

45

67

500

650

75

045/0750/075

41

45

76

600

750

75

045/0900/075

41

45

78

750

900

75

045/1100/075

41

45

84

950

1100

75

045/1200/075

41

45

75

1150

1200

75

045/1300/075

41

45

89

---

1300

75

 

 

 

 

 

 

 

045/1000/100

41

45

71

800

1000

100

045/1200/100

41

45

75

1000

1200

100

045/1300/100

41

45

79

1100

1300

100

045/1400/100

41

45

81

1200

1400

100

045/1500/100

41

45

83

1300

1500

100

045/1600/100

41

45

87

1400

1600

100

045/1800/100

41

45

87

---

1800

100

 

 

 

 

 

 

 

045/1800/120

41

45

87

1560

1800

120

045/2000/120

41

45

91

1760

2000

120

045/2200/120

41

45

100

---

2200

120

 

 

 

 

 

 

 

050/0150/030

46

50

63

90

150

30

050/0200/030

46

50

65

200

200

30

050/0250/030

46

50

68

190

250

30

050/0350/030

46

50

73

290

350

30

 

 

 

 

 

 

 

The types highlighted yellow are also available in stainless steel.

PART NO

Ø d

Ø D1

Ø D2

L max

L max

L

 

±1

±2

horiz.

vert.

min.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

050/0250/050

46

50

62

150

250

50

050/0350/050

46

50

66

250

350

50

050/0450/050

46

50

70

350

450

50

050/0550/050

46

50

73

450

550

50

050/0600/050

46

50

75

---

600

50

050/0650/050

46

50

76

550

650

50

 

 

 

 

 

 

 

050/0350/060

46

50

66

230

350

60

050/0450/060

46

50

65

330

450

60

050/0550/060

46

50

68

430

550

60

050/0600/060

46

50

72

480

600

60

050/0650/060

46

50

73

530

650

60

050/0750/060

46

50

80

630

750

60

050/0900/060

46

50

81

780

900

60

 

 

 

 

 

 

 

050/0750/075

46

50

78

600

750

75

050/0900/075

46

50

84

750

900

75

050/1100/075

46

50

90

950

1100

75

050/1200/075

46

50

94

1050

1200

75

 

 

 

 

 

 

 

050/1100/100

46

50

77

900

1100

100

050/1300/100

46

50

80

1100

1300

100

050/1500/100

46

50

88

1300

1500

100

050/1600/100

46

50

89

1400

1600

100

050/1700/100

46

50

91

---

1700

100

050/1800/100

46

50

94

---

1800

100

 

 

 

 

 

 

 

050/1700/120

46

50

91

1460

1700

120

050/1900/120

46

50

96

1660

1900

120

050/2100/120

46

50

100

1860

2100

120

050/2300/120

46

50

105

---

2300

120

050/2500/120

46

50

115

---

2500

120

050/2800/120

46

50

118

---

2800

120

 

 

 

 

 

 

 

050/2500/150

46

50

116

2200

2500

150

050/2800/150

46

50

118

2500

2800

150

050/3000/150

46

50

123

2500

3000

150

050/3000/180

46

50

123

2640

3000

180

050/3250/180

46

50

128

---

3250

180

050/3250/200

46

50

128

2850

3250

200

050/3500/200

46

50

134

---

3500

200

 

 

 

 

 

 

 

055/0150/030

51

55

67

90

150

30

055/0250/030

51

55

73

190

250

30

055/0300/040

51

55

71

220

300

40

055/0450/040

51

55

76

370

450

40

 

 

 

 

 

 

 

055/0250/050

51

55

66

150

250

50

055/0350/050

51

55

71

250

350

50

055/0450/050

51

55

74

350

450

50

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PART NO

Ø d

Ø D1

Ø D2

L max

L max

L

 

±1

±2

horiz.

vert.

min.

 

 

 

 

 

 

 

 

 

 

 

 

055/0550/050

51

55

78

450

550

50

055/0650/050

51

55

80

450

650

50

 

 

 

 

 

 

 

055/0550/060

51

55

75

430

550

60

055/0650/060

51

55

79

530

650

60

055/0750/060

51

55

83

630

750

60

055/0800/060

51

55

86

680

800

60

055/0900/060

51

55

89

780

900

60

055/1000/060

51

55

92

---

1000

60

 

 

 

 

 

 

 

055/0600/075

51

55

80

450

600

75

055/0750/075

51

55

83

600

750

75

055/0900/075

51

55

89

750

900

75

055/1100/075

51

55

94

950

1100

75

 

 

 

 

 

 

 

055/1100/100

51

55

85

900

1100

100

055/1300/100

51

55

89

1100

1300

100

055/1500/100

51

55

94

1300

1500

100

055/1800/100

51

55

102

1600

1800

100

 

 

 

 

 

 

 

055/1300/120

51

55

92

1060

1300

120

055/1500/120

51

55

94

1260

1500

120

055/1700/120

51

55

96

1460

1700

120

055/1900/120

51

55

100

1660

1900

120

055/2100/120

51

55

105

1860

2100

120

055/2300/120

51

55

110

2060

2300

120

055/2500/120

51

55

116

2200

2500

120

055/2800/120

51

55

123

2500

2800

120

 

 

 

 

 

 

 

055/2500/150

51

55

118

2200

2500

150

055/2800/150

51

55

121

2500

2800

150

055/3000/150

51

55

126

---

3000

150

055/3500/150

51

55

130

2500

3500

150

055/2800/180

51

55

114

2500

2800

180

055/3000/180

51

55

126

2640

3000

180

055/3250/180

51

55

130

2500

3250

180

055/3500/200

51

55

137

---

3500

200

 

 

 

 

 

 

 

060/0150/030

56

60

73

90

150

30

 

 

 

 

 

 

 

060/0200/030

56

60

76

200

200

30

060/0250/030

56

60

78

190

250

30

060/0250/050

56

60

73

150

250

50

060/0350/050

56

60

78

250

350

50

060/0450/050

56

60

82

350

450

50

060/0550/050

56

60

85

450

550

50

060/0650/050

56

60

90

650

650

50

 

 

 

 

 

 

 

060/0450/060

56

60

78

430

450

60

060/0550/060

56

60

81

430

550

60

060/0650/060

56

60

85

530

650

60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

The types highlighted yellow are also available in stainless steel.

PART NO

Ø d

Ø D1

Ø D2

L max

L max

L

 

 

±1

±2

horiz.

vert.

min.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

060/0700/060

56

60

85

580

700

60

 

060/0750/060

56

60

89

630

750

60

 

060/0800/060

56

60

96

680

800

60

 

060/0900/060

56

60

98

---

900

60

 

 

 

 

 

 

 

 

 

060/0750/075

56

60

89

600

750

75

 

060/0800/075

56

60

92

800

800

75

 

060/0900/075

56

60

95

750

900

75

 

060/1100/075

56

60

102

950

1100

75

 

060/1200/075

56

60

103

1200

1200

75

 

060/1300/075

56

60

104

1150

1300

75

 

 

 

 

 

 

 

 

 

060/0900/100

56

60

85

700

900

100

 

060/1000/100

56

60

81

---

1000

100

 

060/1100/100

56

60

90

900

1100

100

 

060/1300/100

56

60

94

1100

1300

100

 

060/1500/100

56

60

100

1300

1500

100

 

060/1800/100

56

60

109

1600

1800

100

 

 

 

 

 

 

 

 

 

060/1700/120

56

60

101

1460

1700

120

 

060/1900/120

56

60

104

1660

1900

120

 

060/2100/120

56

60

108

1860

2100

120

 

060/2300/120

56

60

114

2060

2300

120

 

060/2500/120

56

60

118

2300

2500

120

 

060/2800/120

56

60

126

2500

2800

120

 

 

 

 

 

 

 

 

 

060/2500/150

56

60

118

2300

2500

150

 

060/2800/150

56

60

123

2500

2800

150

 

060/3000/150

56

60

128

---

3000

150

 

060/3500/150

56

60

138

---

3500

150

 

 

 

 

 

 

 

 

 

060/3000/180

56

60

126

2640

3000

180

 

060/3250/180

56

60

132

---

3250

180

 

060/3250/200

56

60

132

2850

3250

200

 

060/3500/200

56

60

139

---

3500

200

 

 

 

 

 

 

 

 

 

065/0100/030

61

65

76

90

100

30

 

065/0150/030

61

65

78

90

150

30

 

065/0250/030

61

65

85

190

250

30

 

 

 

 

 

 

 

 

 

065/0250/050

61

65

76

150

250

50

 

065/0350/050

61

65

84

250

350

50

 

065/0450/050

61

65

88

350

450

50

 

065/0550/050

61

65

92

450

550

50

 

 

 

 

 

 

 

 

 

065/0500/060

61

65

86

380

500

60

 

065/0550/060

61

65

88

430

550

60

 

065/0650/060

61

65

93

530

650

60

 

065/0700/060

61

65

94

580

700

60

 

065/0750/060

61

65

95

630

750

60

 

 

 

 

 

 

 

 

 

PART NO

Ø d

Ø D1

Ø D2

L max

L max

L

 

±1

±2

horiz.

vert.

min.

 

 

 

 

 

 

 

 

 

 

 

 

065/0800/060

61

65

98

680

800

60

065/0900/060

61

65

103

780

900

60

 

 

 

 

 

 

 

065/0750/075

61

65

93

600

750

75

065/0800/075

61

65

96

650

800

75

065/0900/075

61

65

99

750

900

75

065/1100/075

61

65

107

900

1100

75

065/1300/075

61

65

111

1100

1300

75

065/1500/075

61

65

115

---

1500

75

 

 

 

 

 

 

 

065/1000/100

61

65

91

800

1000

100

065/1100/100

61

65

95

900

1100

100

065/1300/100

61

65

99

1100

1300

100

065/1500/100

61

65

108

1300

1500

100

065/1700/100

61

65

113

---

1700

100

065/1800/100

61

65

119

1600

1800

100

 

 

 

 

 

 

 

065/1500/120

61

65

100

1260

1500

120

065/1700/120

61

65

106

1460

1700

120

065/1900/120

61

65

109

1660

1900

120

065/2100/120

61

65

113

1860

2100

120

065/2300/120

61

65

118

2060

2300

120

065/2500/120

61

65

128

2300

2500

120

065/2800/120

61

65

134

2500

2800

120

 

 

 

 

 

 

 

065/2400/150

61

65

120

2100

2400

150

065/2800/150

61

65

132

2500

2800

150

065/3000/150

61

65

142

2500

3000

150

065/3000/180

61

65

136

2640

3000

180

065/3250/180

61

65

145

---

3250

180

065/3250/200

61

65

138

2850

3250

200

065/3500/200

61

65

148

---

3500

200

 

 

 

 

 

 

 

070/0150/030

66

70

85

90

150

30

070/0250/030

66

70

93

190

250

30

070/0350/030

66

70

99

290

350

30

070/0250/050

66

70

85

150

250

50

070/0350/050

66

70

89

250

350

50

070/0450/050

66

70

94

350

450

50

070/0550/050

66

70

97

450

550

50

070/0650/050

66

70

100

---

650

50

 

 

 

 

 

 

 

070/0550/060

66

70

94

430

550

60

070/0650/060

66

70

97

530

650

60

070/0750/060

66

70

102

630

750

60

070/0900/060

66

70

113

800

900

60

070/0500/075

66

70

91

350

500

75

070/0600/075

66

70

94

450

600

75

070/0750/075

66

70

98

600

750

75

070/0800/075

66

70

102

650

800

75

 

 

 

 

 

 

 

The types highlighted yellow are also available in stainless steel.

PART NO

Ø d

Ø D1

Ø D2

L max

L max

L

 

±1

±2

horiz.

vert.

min.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

070/0900/075

66

70

104

750

900

75

070/1100/075

66

70

113

900

1100

75

 

 

 

 

 

 

 

070/0700/100

66

70

88

700

700

100

070/0900/100

66

70

98

900

900

100

070/1100/100

66

70

102

1100

1100

100

070/1300/100

66

70

106

1100

1300

100

070/1500/100

66

70

115

1300

1500

100

070/1800/100

66

70

124

1700

1800

100

 

 

 

 

 

 

 

070/1500/120

66

70

110

1260

1500

120

070/1800/120

66

70

118

1560

1800

120

070/2000/120

66

70

125

1760

2000

120

070/2200/120

66

70

129

1960

2200

120

070/2400/120

66

70

136

2200

2400

120

070/2600/120

66

70

143

---

2600

120

070/2800/120

66

70

150

---

2800

120

070/3000/120

66

70

147

---

3000

120

 

 

 

 

 

 

 

070/2000/150

66

70

129

1700

2000

150

070/2400/150

66

70

135

2100

2400

150

070/2800/150

66

70

139

---

2800

150

070/3000/150

66

70

149

---

3000

150

 

 

 

 

 

 

 

070/2800/180

66

70

138

2440

2800

180

070/3000/180

66

70

141

---

3000

180

070/3250/180

66

70

152

2500

3250

180

070/3250/200

66

70

144

2500

3250

200

070/3500/200

66

70

155

2500

3500

200

 

 

 

 

 

 

 

075/0150/030

71

75

92

90

150

30

075/0250/030

71

75

98

190

250

30

075/0250/050

71

75

89

150

250

50

075/0350/050

71

74

95

250

350

50

075/0450/050

71

75

101

350

450

50

075/0500/050

71

75

105

400

500

50

 

 

 

 

 

 

 

075/0550/060

71

75

100

430

550

60

075/0650/060

71

75

103

530

650

60

075/0750/060

71

75

109

630

750

60

075/0650/075

71

75

99

500

650

75

075/0750/075

71

75

104

600

750

75

075/0900/075

71

75

111

750

900

75

075/1000/075

71

75

114

850

1000

75

075/1100/075

71

75

118

950

1100

75

 

 

 

 

 

 

 

075/0900/100

71

75

102

---

900

100

075/1100/100

71

75

108

900

1100

100

075/1200/100

71

75

112

1000

1200

100

075/1300/100

71

75

112

1100

1300

100

 

 

 

 

 

 

 

 

PART NO

Ø d

Ø D1

Ø D2

L max

L max

L

 

 

±1

±2

horiz.

vert.

min.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

075/1500/100

71

75

120

1300

1500

100

 

075/1700/100

71

75

126

1500

1700

100

 

075/1800/100

71

75

128

1600

1800

100

 

075/2000/100

71

75

133

1700

2000

100

 

075/2200/100

71

75

136

1900

2200

100

 

 

 

 

 

 

 

 

 

075/1500/120

71

75

115

1260

1500

120

 

075/1800/120

71

75

122

1560

1800

120

 

075/2000/120

71

75

127

1760

2000

120

 

075/2200/120

71

75

132

1900

2200

120

 

075/2400/120

71

75

138

2000

2400

120

 

075/2600/120

71

75

142

2200

2600

120

 

075/2800/120

71

75

147

---

2800

120

 

 

 

 

 

 

 

 

 

075/2000/150

71

75

135

1700

2000

150

 

075/2400/150

71

75

140

2100

2400

150

 

075/2600/150

71

75

144

2300

2600

150

 

075/2800/150

71

75

145

2500

2800

150

 

075/3000/150

71

75

152

---

3000

150

 

 

 

 

 

 

 

 

 

075/2800/180

71

75

143

2440

2800

180

 

075/3000/180

71

75

148

---

3000

180

 

075/3250/180

71

75

156

2500

3250

180

 

075/3250/200

71

75

148

2850

3250

200

 

075/3500/200

71

75

158

---

3500

200

 

 

 

 

 

 

 

 

 

080/0150/030

76

80

98

90

150

30

 

080/0250/030

76

80

106

190

250

30

 

080/0250/050

76

80

96

150

250

50

 

080/0450/050

76

80

111

350

450

50

 

080/0550/050

76

80

114

450

550

50

 

 

 

 

 

 

 

 

 

080/0450/060

76

80

102

330

450

60

 

080/0550/060

76

80

105

430

550

60

 

080/0650/060

76

80

110

530

650

60

 

080/0750/060

76

80

115

630

750

60

 

 

 

 

 

 

 

 

 

080/0550/075

76

80

99

400

550

75

 

080/0600/075

76

80

102

450

600

75

 

080/0650/075

76

80

105

500

650

75

 

080/0750/075

76

80

108

600

750

75

 

080/0900/075

76

80

119

750

900

75

 

080/1000/075

76

80

123

850

1000

75

 

080/1200/075

76

80

128

1000

1200

75

 

 

 

 

 

 

 

 

 

080/0900/100

76

80

119

900

900

100

 

080/1100/100

76

80

115

900

1100

100

 

080/1300/100

76

80

120

1100

1300

100

 

080/1500/100

76

80

126

1300

1500

100

 

080/1800/100

76

80

134

1600

1800

100

 

 

 

 

 

 

 

 

The types highlighted yellow are also available in stainless steel.

PART NO

Ø d

Ø D1

Ø D2

L max

L max

L

 

±1

±2

horiz.

vert.

min.

 

 

 

 

 

 

 

080/1300/120

76

80

115

1060

1300

120

080/1500/120

76

80

121

1260

1500

120

080/1800/120

76

80

128

1560

1800

120

080/2000/120

76

80

133

1700

2000

120

080/2200/120

76

80

137

1700

2200

120

080/2400/120

76

80

142

---

2400

120

080/2800/120

76

80

145

---

2800

120

 

 

 

 

 

 

 

080/2000/150

76

80

139

1700

2000

150

080/2200/150

76

80

142

1900

2200

150

080/2400/150

76

80

146

2100

2400

150

080/2600/150

76

80

148

2300

2600

150

080/2800/150

76

80

152

---

2800

150

080/3000/150

76

80

157

---

3000

150

 

 

 

 

 

 

 

080/2800/180

76

80

148

2440

2800

180

080/3000/180

76

80

154

---

3000

180

080/3250/180

76

80

157

---

3250

180

080/3000/200

76

80

154

2600

3000

200

080/3250/200

76

80

160

---

3250

200

080/3500/200

76

80

163

2500

3500

200

 

 

 

 

 

 

 

085/0150/030

81

85

103

90

150

30

085/0250/030

81

85

111

190

250

30

085/0250/050

81

85

105

150

250

50

085/0350/050

81

85

109

250

350

50

085/0450/050

81

85

116

350

450

50

085/0550/050

81

85

119

450

550

50

 

 

 

 

 

 

 

085/0650/060

81

85

115

530

650

60

085/0550/075

81

85

108

400

550

75

085/0900/075

81

85

125

750

900

75

 

 

 

 

 

 

 

085/1500/100

81

85

127

1300

1500

100

085/1500/120

81

85

126

1260

1500

120

085/2000/120

81

85

138

1700

2000

120

085/2400/150

81

85

151

2100

2400

150

085/2800/150

81

85

158

---

2800

150

085/3500/200

81

85

168

---

3500

200

 

 

 

 

 

 

 

090/0150/030

86

90

110

90

150

30

090/0250/030

86

90

116

190

250

30

090/0150/050

86

90

112

50

150

50

090/0250/050

86

90

116

150

250

50

090/0350/050

86

90

121

250

350

50

090/0450/050

86

90

125

350

450

50

090/0350/060

86

90

112

230

350

60

090/0450/060

86

90

114

330

450

60

 

 

 

 

 

 

 

090/0450/075

86

90

115

300

450

75

 

 

 

 

 

 

 

PART NO

Ø d

Ø D1

Ø D2

L max

L max

L

 

±1

±2

horiz.

vert.

min.

 

 

 

 

 

 

 

 

 

 

 

 

090/0550/075

86

90

119

400

550

75

090/0650/075

86

90

124

500

650

75

090/0750/075

86

90

128

600

750

75

090/0900/075

86

90

133

750

900

75

 

 

 

 

 

 

 

090/0750/100

86

90

115

550

750

100

090/0900/100

86

90

120

700

900

100

090/1100/100

86

90

126

900

1100

100

090/1300/100

86

90

132

1100

1300

100

090/1500/100

86

90

144

1300

1500

100

 

 

 

 

 

 

 

090/1300/120

86

90

126

1060

1300

120

090/1500/120

86

90

131

1260

1500

120

090/1800/120

86

90

138

1600

1800

120

090/2000/120

86

90

148

---

2000

120

090/1800/150

86

90

144

1500

1800

150

090/2000/150

86

90

149

1700

2000

150

090/2300/150

86

90

154

---

2300

150

090/2600/150

86

90

159

---

2600

150

090/2800/150

86

90

160

---

2800

150

090/3000/150

86

90

166

---

3000

150

 

 

 

 

 

 

 

090/2600/180

86

90

152

2240

2600

180

090/2800/180

86

90

158

---

2800

180

090/3000/180

86

90

164

---

3000

180

090/2600/200

86

90

153

2400

2600

200

090/3000/200

86

90

162

2500

3000

200

090/3250/200

86

90

166

2500

3250

200

090/3500/200

86

90

170

---

3500

200

090/3700/200

86

90

173

2500

3700

200

090/4000/200

86

90

182

---

4000

200

090/4200/200

86

90

185

---

4200

200

090/4500/200

86

90

194

---

4500

200

 

 

 

 

 

 

 

100/0250/060

96

100

121

130

250

60

100/0350/060

96

100

126

230

350

60

100/0350/075

96

100

119

200

350

75

100/0450/075

96

100

124

300

450

75

100/0600/075

96

100

129

450

600

75

100/0800/075

96

100

138

650

800

75

 

 

 

 

 

 

 

100/0800/100

96

100

126

600

800

100

100/1000/100

96

100

132

800

1000

100

100/1200/100

96

100

137

1000

1200

100

100/1500/100

96

100

146

1300

1500

100

 

 

 

 

 

 

 

100/1100/120

96

100

129

860

1100

120

100/1300/120

96

100

139

1060

1300

120

100/1500/120

96

100

144

---

1500

120

100/1800/120

96

100

148

---

1800

120

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Telescopic spring covers

.

The types highlighted yellow are also available in stainless steel.

PART NO

Ø d

Ø D1

Ø D2

L max

L max

L

 

±1

±2

horiz.

vert.

min.

 

 

 

 

 

100/1500/150

96

100

147

1200

1500

150

100/1800/150

96

100

151

1500

1800

150

100/2000/150

96

100

157

1700

2000

150

100/2500/150

96

100

164

---

2500

150

100/3000/150

96

100

188

---

3000

150

 

 

 

 

 

 

 

100/2500/180

96

100

162

2140

2500

180

100/2800/180

96

100

168

---

2800

180

100/2800/200

96

100

165

---

2800

200

100/3000/200

96

100

170

---

3000

200

 

 

 

 

 

 

 

110/0250/050

106

110

130

---

250

50

110/0250/060

106

110

130

130

250

60

110/0350/060

106

110

135

230

350

60

110/0450/060

106

110

139

330

450

60

110/0350/075

106

110

130

200

350

75

110/0450/075

106

110

134

300

450

75

110/0600/075

106

110

140

450

600

75

110/0800/075

106

110

154

650

800

75

 

 

 

 

 

 

 

110/0650/100

106

110

129

450

650

100

110/0750/100

106

110

134

560

750

100

110/0900/100

106

110

139

700

900

100

110/1100/120

106

110

139

860

1100

120

110/1300/120

106

110

145

1060

1300

120

110/1500/120

106

110

155

1260

1500

120

 

 

 

 

 

 

 

110/1500/150

106

110

155

1200

1500

150

110/1800/150

106

110

157

1500

1800

150

110/2000/150

106

110

160

1700

2000

150

110/2200/180

106

110

165

1840

2200

180

110/2400/180

106

110

170

---

2400

180

 

 

 

 

 

 

 

110/2400/200

106

110

162

2000

2400

200

110/2800/200

106

110

172

2500

2800

200

110/3000/200

106

110

176

---

3000

200

110/3500/200

106

110

189

---

3500

200

 

 

 

 

 

 

 

120/0250/050

116

120

141

---

250

50

120/0350/050

116

120

143

---

350

50

120/0250/060

116

120

141

130

250

60

120/0350/060

116

120

145

230

350

60

120/0450/060

116

120

150

330

450

60

120/0350/075

116

120

140

200

350

75

120/0450/075

116

120

145

300

450

75

120/0600/075

116

120

153

450

600

75

 

 

 

 

 

 

 

120/0650/100

116

120

142

450

650

100

120/0750/100

116

120

147

550

750

100

120/0900/100

116

120

150

700

900

100

 

 

 

 

 

 

 

 

PART NO

Ø d

Ø D1

Ø D2

L max

L max

L

 

 

±1

±2

horiz.

vert.

min.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

120/0900/120

116

120

148

660

900

120

 

120/1100/120

116

120

153

860

1100

120

 

120/1300/120

116

120

158

1100

1300

120

 

120/1500/120

116

120

162

1300

1500

120

 

 

 

 

 

 

 

 

 

120/1300/150

116

120

156

1000

1300

150

 

120/1500/150

116

120

163

1200

1500

150

 

120/1800/150

116

120

167

1500

1800

150

 

120/2000/150

116

120

177

1600

2000

150

 

 

 

 

 

 

 

 

 

120/1600/180

116

120

158

1240

1600

180

 

120/1800/180

116

120

161

1440

1800

180

 

120/2000/180

116

120

169

1640

2000

180

 

120/2200/180

116

120

174

---

2200

180

 

120/2200/200

116

120

165

1800

2200

200

 

120/2400/200

116

120

170

2100

2400

200

 

120/2600/200

116

120

174

---

2600

200

 

 

 

 

 

 

 

 

 

130/0170/050

126

130

150

---

170

50

 

130/0250/060

126

130

145

210

250

60

 

130/0350/060

126

130

155

---

350

60

 

130/0450/060

126

130

156

410

450

60

 

130/0250/075

126

130

145

220

250

75

 

130/0350/075

126

130

150

310

350

75

 

130/0450/075

126

130

156

410

450

75

 

 

 

 

 

 

 

 

 

130/0650/100

126

130

157

600

650

100

 

130/0800/100

126

130

164

---

800

100

 

130/0600/120

126

130

158

360

600

120

 

130/0800/120

126

130

161

560

800

120

 

130/1000/120

126

130

164

760

1000

120

 

130/1100/120

126

130

163

---

1100

120

 

 

 

 

 

 

 

 

 

130/0900/150

126

130

163

500

900

150

 

130/1300/150

126

130

170

1000

1300

150

 

130/1500/150

126

130

174

1200

1500

150

 

130/1800/150

126

130

185

---

1800

150

 

130/1650/180

126

130

170

1650

1650

180

 

130/2000/200

126

130

180

2000

2000

200

 

 

 

 

 

 

 

 

 

140/0250/075

136

140

158

150

250

75

 

140/0350/075

136

140

162

250

350

75

 

140/0450/075

136

140

165

350

450

75

 

140/0600/075

136

140

175

---

600

75

 

 

 

 

 

 

 

 

 

140/0350/100

136

140

153

250

350

100

 

140/0450/100

136

140

162

350

450

100

 

140/0600/100

136

140

172

500

600

100

 

140/0700/120

136

140

170

460

700

120

 

140/1000/120

136

140

192

---

1000

120

 

 

 

 

 

 

 

 

tele scopic spring india

The types highlighted yellow are also available in stainless steel.

PART NO

Ø d

Ø D1

Ø D2

L max

L max

L

 

±1

±2

horiz.

vert.

min.

 

 

 

 

 

140/1000/150

136

140

180

700

1000

150

140/1300/150

136

140

187

1000

1300

150

140/1500/150

136

140

190

---

1500

150

 

 

 

 

 

 

 

140/1900/200

136

140

185

1500

1900

200

140/2000/200

136

140

193

1600

2000

200

140/2400/200

136

140

204

---

2400

200

 

 

 

 

 

 

 

150/0350/060

145

150

172

300

350

60

150/0450/075

146

150

188

---

450

75

150/0500/075

146

150

190

---

500

75

150/0600/075

146

150

194

---

600

75

 

 

 

 

 

 

 

150/0750/150

146

150

180

---

750

150

150/1100/150

146

150

187

---

1100

150

150/1300/150

146

150

197

---

1300

150

 

 

 

 

 

 

 

PART NO

Ø d

Ø D1

Ø D2

L max

L max

L

 

±1

±2

horiz.

vert.

min.

 

 

 

 

 

160/0250/060

156

160

178

---

250

60

160/0250/075

156

160

180

---

250

75

160/0450/075

156

160

189

---

450

75

 

 

 

 

 

 

 

160/0450/100

156

160

182

350

450

100

160/0650/120

156

160

191

550

650

120

160/0750/120

156

160

193

600

750

120

 

 

 

 

 

 

 

160/0800/150

156

160

197

---

800

150

160/0950/150

156

160

200

---

950

150

160/1000/150

156

160

202

---

1000

150

160/1200/150

156

160

204

---

1200

150

 

 

 

 

 

 

 

160/1200/200

156

160

193

---

1200

200

160/1300/200

156

160

200

---

1300

200

160/1400/200

156

160

212

---

1400

200

160/2000/200

156

160

222

---

2000

200

 

 

 

 

 

 

 



tele scopic spring